Chimney Repair in Reno, NV | Reno Chimney Cleaning

Chimney Repair in Reno - Camera Evidence Before Any Quote

Liner and masonry work is where this trade gets a bad name, so nothing is quoted until you have seen the camera footage yourself. Then a written, itemized price with no scope creep.

Call to schedule your free estimate

Work is performed by our local vetted partner.

Free
Written Quotes
Licensed & Insured Written Quotes Free Estimates All Brands Satisfaction Guarantee

Work is performed by our local vetted partner.

Masonry repairMasonry repair
Sweep & inspectionSweep & inspection
Caps & crownsCaps & crowns
Flue reliningFlue relining
Gas fireplace serviceGas fireplace service
Every visit starts with

Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed

Worth knowing

Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.

Get your free estimate

Trusted Chimney Repair for Reno Homeowners

Chimney problems in Reno rarely announce themselves. A cracked crown, a pitted liner, or loose flashing around the stack tends to sit quietly until the first cold snap, when a fire gets lit and smoke backs into the room or a draft that used to pull strong suddenly won’t. Our technicians have up to 10 years of experience diagnosing exactly these failures, and as a chimney-only company we handle the sweep, the inspection, and the repair under one roof, so you’re not coordinating a roofer, a mason, and a sweep for one job. We book same-day repair when the schedule allows. Call (844) 543-7293 to set up a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.

Call (844) 543-7293

Chimney Cap Installation

Chimney Cap Installation is the fitting of a protective cover over the flue opening, and it’s the single cheapest way to keep Reno weather, birds, and debris out of your chimney. You need one when the flue is open to the sky, when a cap has rusted through, or when animals have found their way in. We install caps from Gelco and Famco, matched to your flue size and appliance type, and we check the cap sits level so runoff drains away from the crown. A cap installation in Reno typically runs $180-$450 depending on flue count and cap style. The written estimate sets the final price.

Stainless and Galvanized Options

Stainless caps hold up far better against snowmelt, freeze-thaw cycles, and high-desert sun than galvanized steel, which can rust and pit within a few seasons. We’ll walk you through both and let you decide. Cheaper isn’t always the right call here.

Multi-Flue and Custom Fits

Chimneys with more than one flue need a cap sized to the whole crown, not a single-flue cover dropped on top. We measure the crown and the flue layout before ordering. That measurement is why a custom cap fits properly instead of rattling in the wind.

Explore

Styles & brands we work with

  • Sweep & inspection
  • Caps & crowns
  • Flue relining
  • Masonry repair
  • Gas fireplace service

Chimney Cap Replacement

Chimney Cap Replacement is the removal of a failing or missing cap and the fitting of a new one, and it’s usually needed when a cap is dented, rusted, or has lost its mesh. You’ll know it’s time when you see rust stains on the crown, hear birds or squirrels in the flue, or notice water getting past the opening. We pull the old cap, inspect the flue top while we’re up there, and set a new stainless or galvanized cap from Gelco or Famco. A replacement in Reno typically runs $200-$500, and the written estimate sets the final price.

When a Cap Fails Early

Caps fail early when they’re undersized for the flue or the mesh has been crushed by snow load. We check fit and the condition of the flue tile before we set a new one. No point replacing a cap if the flue tile is already spalling.

Animal Guards and Spark Screens

Mesh on a cap does double duty: it keeps raccoons and birds out and it catches embers before they land on the roof or in dry brush. In a dry Reno summer, that spark screen matters. We check it’s intact every time we replace a cap.

Chimney Liner Installation

Chimney Liner Installation is the fitting of a new flue liner inside your existing chimney, and it’s the repair that matters most for safety. You need one when the old clay tile is cracked, when the flue is unlined, when you’ve changed appliance types, or when a camera inspection shows gaps the flue gases can pass through. We install DuraFlex and Olympia Chimney liner systems, and where the flue is sound enough we use HeatShield resurfacing instead. A liner installation in Reno typically runs $2,800-$6,500 depending on flue height and appliance. The written estimate sets the final price.

Tiled Versus Relined Flues

An original clay-tile flue can crack from a chimney fire or from years of freeze-thaw at the top. Once it’s cracked, gases can reach the surrounding structure. A stainless liner gives you a continuous, sealed path from the appliance to the cap.

Resurfacing Instead of Relining

HeatShield resurfacing is a repair option for flues that are still structurally sound but have minor gaps or a rough interior. We inspect first and recommend it only when it’s the right fit. It’s not a one-size-fits-all fix, and we don’t sell it as one.

Chimney Flashing Repair

Chimney Flashing Repair is the correction of the metal that seals the gap between your chimney and the roof, and it’s the most common source of roof leaks we find. You need it when flashing has pulled away, when the caulk has dried and cracked, or when you see water staining on the ceiling near the chimney. We re-seat, re-caulk, or replace the flashing and check the counter-flashing that ties into the masonry. Flashing repair in Reno typically runs $350-$900 depending on roof pitch and access. The written estimate sets the final price.

How Snowmelt Finds Weak Points

Reno’s snowmelt runs hard in spring, and water follows the path of least resistance. Any gap in the flashing becomes a channel. We trace the leak back to its source rather than sealing over the symptom.

Step Flashing and Counter-Flashing

Two layers protect the joint: step flashing woven into the shingles and counter-flashing set into the masonry. When either one fails, the other can’t carry the load. We repair both as a pair.

Chimney Crown Repair

Chimney Crown Repair is the fixing or rebuilding of the concrete cap at the very top of the chimney, and it’s what keeps water from soaking into the masonry below. You need it when the crown has cracked, when it’s pulling away from the flue, or when it no longer slopes enough to shed water. We remove the failed concrete, re-form the crown with a proper slope and overhang, and seal it. Crown repair in Reno typically runs $400-$1,200 depending on crown size and how much rebuild is needed. The written estimate sets the final price.

Cracked Crowns and Water Damage

A hairline crack in the crown seems minor until water freezes inside it and widens it. From there, water works into the brick and the freeze-thaw cycle in Reno does the rest. A small crown repair now prevents a masonry rebuild later.

Slope and Overhang Matter

The crown should shed water off the sides of the chimney rather than letting it pool at the flue. We check slope and overhang before we recommend a repair. A flat crown is asking for trouble.

Chimney Repair Companies

Chimney Repair Companies vary widely in focus, and the one you choose matters more than the price on the first estimate. Some are generalists who take chimney work between roofing and drywall jobs; others, like us, do chimneys only. You need a specialist when the repair involves a liner, a crown, or masonry, where a wrong call can cost far more to undo. We come out with a camera, we show you what we find, and we quote the repair in writing. Repair work in Reno typically runs $180-$6,500 depending on scope, and the written estimate sets the final price.

Questions Worth Asking

Ask whether the company offers sweep, inspection, and repair from one outfit, or whether you’ll be coordinating three contractors. Ask what diagnostic tools they use. Ask to see the camera footage before approving any work.

What Sets a Specialist Apart

Chimney-specific training matters more than general trade experience. A specialist knows where creosote builds, how flue gases behave, and what a sound flue looks like on camera. That knowledge is what separates an accurate repair recommendation from a guess.

Chimney Masonry Repair

Chimney Masonry Repair is the fixing of the brick, mortar, and stone above the roofline, and it’s often needed after years of freeze-thaw cycling. You need it when mortar joints have crumbled, when brick faces are spalling, or when the stack is leaning or has soft spots. We repoint joints, replace damaged brick, and rebuild the top courses when needed, working with the same materials as the rest of the stack. Masonry repair in Reno typically runs $500-$4,000 depending on how much of the stack is affected. The written estimate sets the final price.

Freeze-Thaw and Spalling Brick

Reno’s cold nights and warm days pull moisture into the brick, then freeze it and push the face off. That’s spalling, and once it starts, it spreads. Repointing the joints slows it and replacing the damaged brick stops it.

Mortar Matching and Repointing

The wrong mortar can do more harm than the damage it’s meant to fix. We match the mortar to the existing brick so the repair holds through the next winter. That’s the kind of detail generalists tend to skip.

Brands We Service

We work with DuraFlex and Olympia Chimney liner systems, and those two cover most of the relining projects we see in Reno. Knowing where a DuraFlex liner wears and how an Olympia system handles a taller flue is the difference between a repair that lasts and one that has to be redone. For caps and dampers, we install Gelco and Famco products, and we know which fittings suit which flue and appliance. When a repair calls for liner resurfacing, we use HeatShield, and we use it only where it’s the right solution, not as a default. We also work with Copperfield for components that fit specific setups.

We’re not a dealer and we don’t push one brand over another. Whether you have Gelco, Famco, DuraFlex, Olympia Chimney, HeatShield, or Copperfield on your chimney, or any other make, we can help. If your system needs a product we don’t handle, we’ll tell you so and point you toward what fits.

Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Signs You Need a Pro Right Now

  • Smoke backing into the room. A draft that used to pull strong but now rolls smoke into the living room usually means a blocked flue, a failing liner, or a cap that’s lost its mesh. It’s worth a look before you build another fire.
  • Water stains near the chimney or on the ceiling. Streaks point to flashing, crown, or masonry letting water in. Reno’s spring snowmelt exposes the gap fast, so don’t wait for the ceiling to sag.
  • Cracked or missing crown. A damaged crown lets water soak into the brick below, and freeze-thaw does the rest. Catching it early keeps a crown repair from turning into a masonry rebuild.
  • Crumbling mortar or spalling brick. Loose mortar and flaking brick faces mean the stack is losing structural integrity. It’s safer to have a specialist look before the next winter.
  • A chimney fire, even a small one. A chimney fire can crack the flue tile and leave the liner compromised in ways you can’t see from the hearth. A camera inspection tells you what’s actually going on.

Our Process, Step by Step

  1. 1
    We start with a sweep. A dirty flue can hide damage, so we sweep first. That gives us a clean surface to inspect and a safer workspace for the technician.
  2. 2
    We run a camera inspection. A camera on a flexible rod goes the full length of the flue, and we record what it sees. You see the footage too, so nothing gets recommended that you can’t verify yourself.
  3. 3
    We write up what we find. You get a plain-language report of what’s sound, what’s wearing, and what needs attention now versus what can wait. No scare tactics, no upsells.
  4. 4
    We quote the repair in writing. The quote is itemized, and it’s the price. If the scope changes once work begins, we stop and talk to you before going further.
  5. 5
    We do the repair and check the job. We fit the right liner, cap, crown, or masonry for your flue, then test the draft and confirm the fix. One company handles the whole job from sweep to repair.

How Much Does Chimney Repair Cost in Reno?

Chimney repair in Reno typically runs $180-$6,500 depending on what needs fixing and how much of the system is affected. A cap installation runs $180-$450; a cap replacement $200-$500; flashing repair $350-$900; crown repair $400-$1,200; masonry repair $500-$4,000; and a full liner installation $2,800-$6,500. Those ranges reflect the local market and the professional-grade materials we use, and the written estimate sets the final price for your job.

What moves the price most is scope, not labor rates. A single flashing repair is a different job from a lined and capped flue with a new crown. Roof pitch and access matter too, especially on steep or two-story roofs. Liner height and appliance type drive the biggest swing in the liner number. You avoid overpaying by getting the camera inspection first, so the repair is sized to the actual damage rather than a worst-case guess. We don’t recommend work that isn’t supported by what the camera shows, and we’ll tell you plainly when something can safely wait until next spring.

Every free estimate includes the sweep, the camera inspection with the footage shown to you, and a written, itemized quote. No service-call fee, no trip charge. Call (844) 543-7293 for an exact quote. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.

Our Service Area Near Reno

We serve homeowners throughout Reno and the surrounding communities, including Sun Valley, Lemmon Valley, Cold Springs, Spanish Springs, Washoe Valley, Incline Village, Mogul, Golden Valley, and Verdi. Whether you’re on a steep lot off the valley floor or up in the Sierra foothills, our technicians reach you with the same sweep, inspection, and repair. If you’re outside one of these towns, call and we’ll tell you whether we cover your street. For nearby communities, see our chimney repair and chimney repair pages.

Serving Reno, NV – Our Local Coverage Area

We serve Reno and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.

Frequently Asked Questions About Chimney Repair in Reno

Schedule Your Chimney Repair Service in Reno Today

If you’ve been putting off a repair, or you’re not sure whether the problem is serious, a camera inspection answers it. We sweep, we inspect, and we repair as one chimney-only company, using professional-grade materials from DuraFlex, HeatShield, Gelco, Olympia Chimney, Famco, and Copperfield. Call (844) 543-7293 for a free, no-obligation estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.

Written by the team at Reno Chimney Cleaning.

Why Reno Chooses Reno Chimney Cleaning

We set the standard for chimney repair in Reno.

Evidence Before Recommendations

Every sweep includes a camera inspection and a photo report. If we find something, you see it before we quote it - no repair is ever recommended on our word alone.

Licensed & Insured

Fully certified technicians who meet all local and state licensing requirements.

Upfront Pricing

No hidden fees, no surprises. You approve the price before any work begins.

Guaranteed Work

Every repair and installation is backed by our workmanship warranty and satisfaction guarantee.

How It Works in Reno

Getting your chimney repair handled is simple and fast.

1

Call or Request a Free Estimate

Tell us about your chimney repair needs and we provide an upfront, transparent quote with no obligation and no hidden fees.

2

We Book a Time That Works for You

A background-checked, certified technician arrives at the time we agree on.

3

Problem Solved, Guaranteed

We complete the job to your full satisfaction, backed by our warranty and satisfaction guarantee.

What happens when you call

  1. 1
    A real person answersNo phone trees. Talk to a local chimney repair pro.
  2. 2
    You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
  3. 3
    We come out and measureLicensed & insured, at a time that suits you. The visit and the quote are both free.
  4. 4
    You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.

What Reno Customers Say

Trusted by homeowners across Reno and surrounding areas.

★★★★★

"Level two inspection before we bought the house. The report was detailed enough to use as a negotiating point and he explained every photo in it."

Rafael Guzman
★★★★★

"Fireplace had never drawn properly since we moved in. He found the damper was only opening halfway due to a bent linkage and fixed it in ten minutes."

Eric Bennett
★★★★★

"Thorough sweep and a clear report. He was running late from the job before and arrived near the end of the window, though he did call to warn me."

Dale Fletcher

Ready for Chimney Repair in Reno?

Call now for a free estimate, or request one below. Licensed, insured, and here with fast help in Reno.

(844) 543-7293

Request a Free Estimate in Reno

Tell us about your chimney repair needs. We'll respond within the hour.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Us
Local Service Coverage
Call Now - We Answer 24/7