Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Trusted Chimney Sweep for Reno Homeowners
Most Reno homeowners don’t think about their chimney until something goes wrong: smoke backing into the living room on a cold night, a draft that won’t quit, or a creosote smell that shows up every time the furnace kicks on. That’s usually the point where a generalist handyman gets called, and chimney work is the wrong job for a generalist. We do chimneys only, crown to liner, and our technicians have up to 10 years of experience diagnosing what’s actually happening inside the flue. We handle sweep, inspection, and repair as one integrated service, so nobody has to coordinate three contractors over one chimney problem. Same-day appointments are often available in Reno when you call. Reach us at (844) 543-7293.
Chimney Sweep Services
Chimney Sweep Services cover the mechanical removal of soot, creosote, and debris from the flue, firebox, and smoke chamber, and they’re what you book when it’s been a season or two since the last cleaning. In Reno’s high-desert climate, wood burns hot and dry, but the cold nights still push people into long, slow, smoldering fires that lay down sticky creosote fast. We sweep with rotary brushes sized to your flue, then verify with a camera before we leave. Rates vary by flue length and buildup; most jobs are quoted per fireplace and set by the written estimate.
What a Standard Sweep Covers
We brush the flue, scrape the firebox, clear the smoke shelf, and vacuum the surrounding area so nothing lands on your floor. The damper gets checked and the cap inspected while we’re up there. Anything beyond routine cleaning gets flagged in the inspection report, not added to the bill without your say-so.

When to Book One
Once a year with regular wood burning, or after any season where you noticed smoke rolling back or a heavier creosote smell. If you’ve just bought a Reno house with a fireplace of unknown history, book a sweep before the first fire. It’s cheaper than guessing.

Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Chimney Cleaning
Chimney Cleaning is the broader job: the same creosote removal as a sweep, plus attention to the parts of the system most people never see, including the smoke chamber, the flue offset, and the cap and screen. It’s the service to book when you want the whole assembly verified clean, not just the visible firebox. We pull the camera through the flue and photograph the interior so you can see the condition of the liner with your own eyes. That record matters in Reno, where a lot of older homes have clay tile liners that have been through decades of heating cycles. Pricing depends on how many flues and how much buildup; call for an exact quote on your fireplace.
Camera Verification
We run a chimney camera from the top down and share the footage with you. Cracks, gaps, and offset tile show up clearly. Nothing is recommended off a glance from the roof.
Debris and Nest Removal
Reno sits at the edge of open country, so birds, squirrels, and the occasional raccoon find uncapped flues inviting. We remove blockages and, if your cap is missing or damaged, we can fit a proper one from Gelco or Famco. A blocked flue is a carbon monoxide problem, not just a draft problem.
Fireplace Cleaning
Fireplace Cleaning focuses on the firebox itself: ash removal, soot scraping off the brick or steel, glass and door cleaning on inserts, and the surround. It’s the service to book when the firebox looks bad or smells like old smoke even when there’s no fire. Wood-burning fireplaces in Reno build up a fine gray ash film that stains masonry over time if left alone. We clean the firebox, check the grate and andirons, and inspect the firebrick for cracks that could let heat into the wall cavity. We treat this as part of the same visit as a sweep where possible; call for an estimate on your setup.
Firebrick and Mortar Inspection
Cracked firebrick and crumbling mortar joints are the most common issues we find in older Reno fireboxes. A crack wider than a hairline gets flagged, because heat migrates through it. Repointing or brick replacement is quoted separately, only after you’ve seen the photos.
Glass and Door Care
Insert glass goes cloudy from soot and mineral deposits, and doors need their gaskets checked to seal properly. We clean the glass and inspect the door seal so the insert burns the way it was designed to. A leaking door gasket wastes wood and cools the fire.
Chimney Services
Chimney Services is the umbrella term for the three things we do: sweep, inspection, and repair. When you have a chimney problem, the first question is which of those you actually need, and the answer depends on what the inspection finds. That’s why we inspect before we recommend anything. We use HeatShield resurfacing for liners that can be restored, DuraFlex and Olympia Chimney systems for full relining, and Famco and Gelco caps and dampers for weatherproofing and draft correction. One company handles all three phases, so you’re not handing a chimney back and forth between a sweeper and a mason. Costs depend on scope; call for an exact quote.
Diagnosis First
We inspect before we sell. Sweeping, camera work, and a written report come before any repair conversation. If the chimney can safely wait, we tell you so.

Materials Matched to the Problem
A cracked clay liner and a rusted-out steel liner are different problems calling for different fixes. HeatShield restores the first; DuraFlex or Olympia replaces the second. The right call depends on the flue’s condition, not a default upsell.
Chimney Sweep Certified
Chimney Sweep Certified means the technician doing the work has been trained specifically on chimney systems, not general household repair. It matters because a chimney is a combustion system with specific clearances, draft requirements, and creosote behavior that a plumber or roofer won’t know from experience. Our technicians have up to 10 years of experience on chimney-specific diagnostics, and every job follows a documented sweep and inspection protocol. We work with professional-grade materials from Copperfield, Gelco, Famco, DuraFlex, Olympia Chimney, and HeatShield rather than whatever’s cheapest that week. If you’re comparing quotes, ask any company what certification and products they actually use. Call for a free estimate.
Why Chimney-Only Matters
A specialist sees the same problems repeatedly and recognizes the patterns early. The hairline crack in the crown, the offset tile joint, the flue that’s undersized for the appliance. A generalist sees a handful of chimneys a year and misses the signals.
Documented Inspections
Every visit produces a record: what we found, what we did, what’s coming up. That paper trail matters if you ever sell the house or file an insurance claim. You keep the photos and the report.
Gas Fireplace Cleaning
Gas Fireplace Cleaning addresses the parts of a gas-burning system that soot and dust collect on: the burner, the logs or glass media, the pilot assembly, and the venting. It’s the service to book when the flame has gone lazy or yellow, the glass is filmed, or the fireplace smells faintly of exhaust when it runs. Gas fireplaces don’t produce creosote the way wood does, but they still need periodic cleaning and vent verification. We clean the burner and media, check the vent for blockage, and verify draft. Pricing runs per appliance and is set by the written estimate; call for specifics.
Venting and CO Checks
A vented gas fireplace that isn’t drafting properly can put combustion byproducts into the room. We verify vent flow and check that the termination isn’t obstructed. If anything looks off, we flag it and explain what it means before you use the fireplace again.
Burner and Media Cleaning
Soot on the logs or glass media dulls the flame and can cause uneven burning. We remove and clean the media, clear the burner ports, and reassemble so the fire looks right again. It’s a straightforward job that most people skip for years.
Chimney Maintenance
Chimney Maintenance is the annual routine that keeps the system safe and functional between big repairs: sweep, visual and camera inspection, cap and crown check, and a note on anything trending toward a problem. It’s what you book before burning season in Reno, when the first cold snap hits and everyone suddenly wants an appointment. Our technicians have up to 10 years of experience spotting the small stuff (a hairline crown crack, a loose cap screw, a damper that no longer seats) before it turns into a relining project. Routine maintenance costs far less than repair, and we’ll tell you plainly when work can safely wait. Call to book a maintenance visit.
Annual Inspection Rhythm
Once a year is the baseline for regular wood burning, and more often for heavy use or a fireplace that burns a lot of pitchy wood. We keep the records so you don’t have to remember the last visit. If something was flagged last time, we check it first.
Crown and Cap Checks
The crown and cap take the brunt of Reno’s weather: summer sun, winter freeze-thaw, and wind. We check for cracks, loose fasteners, and rust on the cap or spark arrestor. Small repairs caught early are cheap; a failed crown lets water into the flue.
Brands We Service
We work with Copperfield and Gelco for caps and dampers, and we know where those products wear out. Copperfield’s venting and termination components take the same wind and sun load as the rest of the chimney, and their seals and fasteners are usually the first thing to check on a draft problem. Gelco caps and dampers handle weatherproofing and draft correction; we check fit and function on every visit.
On the liner and repair side, we use HeatShield resurfacing where the existing flue can be restored, and DuraFlex and Olympia Chimney systems for full relines. Each has its place, and we match the material to the flue’s condition after the camera inspection. Whether you have Copperfield, DuraFlex, Olympia Chimney, HeatShield, Gelco, or any other make, we can help.
See the difference
Before
After
Before
After
Before
AfterSigns You Need a Pro Right Now
- Smoke rolling back into the room. Smoke that won’t go up the flue usually means a blockage, a draft problem, or a flue that’s undersized for the appliance. It’s a sign the system isn’t venting correctly, and it needs a proper inspection before the next fire.
- A strong creosote smell that won’t clear. Creosote has a distinct, sharp smell, and if it’s persistent even when the fireplace is cold, there’s buildup that needs removal. Heavy creosote is a chimney fire risk, and it won’t go away on its own.
- Visible soot on the firebox or glass. Soot on the firebox walls or blackened insert glass points to incomplete combustion or a venting issue. Both are worth checking before the next heating season.
- Water stains or a musty smell near the chimney. Water getting past a failed crown or cap shows up as stains on the ceiling or a damp smell near the chimney. Left alone, moisture damages the flue and masonry.
- Debris or animal activity at the cap. Birds, squirrels, or nests in an uncapped flue are a blockage and a carbon monoxide risk. If you hear scratching or see debris in the firebox, stop using the fireplace and book a visit.
Our Process, Step by Step
- 1
Talk through the symptoms. We ask what you’ve noticed: smoke, smell, draft, water, or nothing at all and just a yearly cleaning. That conversation tells us where to focus the visit and what tools to bring.
- 2
Sweep the flue and firebox. We lay drop cloths, brush the flue with rotary equipment sized to your flue, scrape and vacuum the firebox, and clean up behind ourselves. No soot trail through the house.
- 3
Run the camera. A chimney camera goes top-down through the flue, and we review the footage with you. Cracks, gaps, and offset tile are documented in photos you keep.
- 4
Inspect the externals. We check the crown, cap, flashing, and masonry from the roof, looking for water entry points and draft obstructions. Anything suspect gets photographed and noted.
- 5
Write it up and quote. You get a plain report of what we found, what can wait, and what needs attention. Any repair is quoted in writing, and nothing is done without your approval.
How Much Does Chimney Sweep Cost in Reno?
A typical chimney sweep in Reno runs roughly $150-$350 depending on flue length, how much creosote has built up, and whether you have one fireplace or several. A camera inspection added to the visit usually runs in the $100-$250 range on its own, and combining it with a sweep is cheaper than booking separately. Fireplace cleaning on its own is a smaller job, usually $100-$200. Gas fireplace cleaning is often quoted per appliance and depends on how much of the assembly comes apart for access. What moves the number: the number of flues, the accessibility of the roof, and how much buildup we’re removing. What doesn’t: the day of the week or how soon you need it. The written estimate sets the final price, and we don’t add work to a bill without your approval.
The best way to avoid overpaying is to have the camera inspection done and ask to see the footage. You shouldn’t be told you need a reline or masonry work you have no way to verify. If the chimney is fine, we say so, even if that means a smaller invoice. Ask for a written quote before any work starts.
Our Service Area Near Reno
We serve homeowners across the Reno area and the surrounding communities: Sun Valley, Lemmon Valley, Cold Springs, Spanish Springs, Washoe Valley, Incline Village, Mogul, Golden Valley, and Verdi. Travel times vary by distance and weather, but we book appointments with clear windows so you’re not waiting around all day. If you’re in one of the outlying communities, call and we’ll confirm availability. We answer 24/7 and dispatch Sunday through Friday, 7am to 7pm. You can also read more about our chimney sweep work in Sun Valley and our chimney sweep service in Lemmon Valley.
Serving Reno, NV – Our Local Coverage Area
We serve Reno and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions About Chimney Sweep in Reno
A chimney sweep is a service visit that removes soot, creosote, and debris from the flue, firebox, and smoke chamber using brushes and vacuums sized to your chimney. It’s a mechanical cleaning, not a chemical treatment, and it’s the routine maintenance that keeps a wood-burning system safe. We pair every sweep with a camera inspection so you know the flue’s condition, not just that it was cleaned. Call (844) 543-7293 for an estimate.
A standard single-flue sweep usually takes 45 minutes to an hour and a half, and a sweep plus inspection runs closer to two hours. Longer flues, heavy creosote, or multiple fireplaces add time. We lay drop cloths and clean up before we leave, so the visit ends with the room the way we found it. Call for an exact quote on scheduling.
A typical sweep in Reno runs $150-$350 depending on flue length, creosote buildup, and the number of fireplaces, with a camera inspection often adding $100-$250. Combining sweep and inspection is cheaper than booking them separately. The written estimate sets the final price, and estimates are free. Call (844) 543-7293 for an exact quote.
Yes, we service Copperfield venting and termination components, and we work with Gelco, Famco, DuraFlex, Olympia Chimney, and HeatShield products as well. Whether you have Copperfield, Gelco, or any other make, we can help. If your cap, damper, or liner is a brand you’re unsure about, we identify it during inspection and tell you what we find.
Same-day appointments are often available in Reno when you call early. We answer 24/7, and fast dispatch runs from 7am to 7pm, Sunday through Friday; a call outside dispatch hours is booked into the next opening. We don’t work Saturdays. The price is set per job by the written estimate regardless of when you book. Call (844) 543-7293 to check availability.
Workmanship on the sweep itself is straightforward and we stand behind it. Product warranties come from the manufacturer and vary by brand: DuraFlex, Olympia Chimney, HeatShield, Gelco, Famco, and Copperfield each set their own terms. We’ll explain the applicable coverage before any repair work is booked. Call for details on your specific job.
Clear the area around the fireplace and move anything breakable away from the hearth. Don’t burn a fire for at least 24 hours before the visit, so the firebox is cool and safe to work in. If your damper is tricky or the fireplace has an insert, let us know when you book. That’s all you need to do; we handle the rest.
Schedule Your Chimney Sweep Service in Reno Today
Book your chimney sweep in Reno before burning season and get the system verified by a specialist. We inspect before we recommend, match professional-grade materials to the actual problem, and handle sweep, inspection, and repair as one company. Estimates are free and there’s no obligation. Call (844) 543-7293. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Reno Chimney Cleaning.