Masonry repair
Sweep & inspection
Caps & crowns
Flue relining
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Repair Across Washoe Valley
If your chimney crown is cracking, your flashing has pulled loose, or your flue liner is showing wear, we handle the repair. Reno Chimney Cleaning works on chimney systems across Washoe Valley, from the older ranch homes and cabins on the valley floor up through the acreage properties off the Mount Rose Highway corridor and Old Washoe Valley roads. This is a valley where a lot of homes heat with wood, and that shapes what repairs actually get needed. Call (844) 543-7293 for a free estimate. We answer 24/7. Fast dispatch, 7am-7pm, Sunday through Friday.
Why Washoe Valley Homeowners Call Reno Chimney Cleaning for Chimney Repair
Washoe Valley homeowners call us because chimney repair here is a specialist job, not a side task for a general handyman. We do three things: sweep, inspect, and repair. That’s it. Our technicians have up to 10 years of experience, and every one of them is trained on chimney-specific diagnostics, not roofing or plumbing with a chimney stuffed in at the end.
We inspect before we recommend. That matters in a valley where the burn scar, cold nights, and heavy wood-stove use all leave their own marks on a chimney. Nothing gets recommended without camera evidence you can see for yourself, and we’ll tell you plainly when a repair can safely wait. Getting to Washoe Valley does take a longer drive than a stop inside Reno, and we plan for that so an estimate doesn’t turn into an all-day wait. Licensed and insured, with a written estimate that sets the final price before any work starts. A typical ranch or cabin here has original masonry and a wood stove that runs hard from fall into spring. That’s the kind of chimney we know how to read.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Chimney Flashing Repair in Washoe Valley
Chimney Flashing Repair in Washoe Valley usually starts with the same complaint: a ceiling stain that shows up after snowmelt, not a draft problem. Flashing is the metal where the chimney meets the roof, and on the 1960s – 1980s masonry chimneys common on valley lots, that flashing has had decades of freeze-thaw and spring wind working at the seams. Once it pulls loose, water runs in behind it. A typical flashing repair here runs $275 – $650, and re-flashing a masonry penetration with new step and counterflashing sits at the higher end.
What the job involves
We lift the old flashing, clear the debris and old sealant, and set new metal tied into the masonry and the roofing course so water has somewhere to go besides the smoke chamber. Sealant alone doesn’t fix a pulled flashing, and we won’t sell it as a fix.
Signs water is already getting in
Rust streaks on the firebox, a white bloom on the exterior brick, or ceiling stains near the chimney chase all point to a flashing problem rather than a draft one. Catch it early and it’s a repair; let it run and you’re looking at masonry work.
Chimney Crown Repair in Washoe Valley
Chimney Crown Repair in Washoe Valley comes up because the valley floor sits around 5,000 ft, and below-freezing nights crack the mortar cap on top of a chimney faster than most homeowners expect. The crown is the concrete or mortar slab that sheds water off the chimney top. Once it cracks, meltwater gets into the smoke chamber, and that’s what worsens spalling in the flue liner over time. A typical crown repair here runs $350 – $900 depending on the size and condition of the crown; a full rebuild of a badly deteriorated crown sits at the top of that range.
Rebuilding versus resealing
A hairline crack in an otherwise sound crown can be resealed. A crown that’s crumbling, separating from the flue, or has lost its overhang needs to come off and be rebuilt with a proper slope so water sheds off the edge.
Why it’s worth catching early
Crown damage rarely stays a crown problem. Left alone, it feeds water into the flue liner, and a liner repair costs more than a crown repair every time. We check the crown on every visit for that reason.
Trusted Brands We Service in Washoe Valley
The right repair depends on matching the material to the flue, not one-size-fits-all. We work with professional-grade lines, including HeatShield for liner resurfacing where the existing clay tile can be saved, DuraFlex and Olympia Chimney for full relining projects, and Gelco and Famco caps and dampers for weatherproofing and draft. Famco spark arrestors matter here given what the burn scar throws into the air. We don’t claim to stock parts locally; what we do is order the correct material and keep turnaround tight. Call (844) 543-7293 for a free estimate, and we’ll tell you which option fits your flue. We answer 24/7. Fast dispatch, 7am-7pm, Sunday through Friday.
See the difference
Before
After
Before
After
Before
AfterCommon Chimney Repair Problems We See in Washoe Valley Homes
- Freeze-thaw crown cracks. Around 5,000 ft, nights drop below freezing often enough that a mortar crown takes repeated freeze-thaw cycles. Small cracks open, water gets in, and the spalling starts at the flue top.
- Original flashing that’s pulled loose. The flashing on original masonry chimneys from the 1960s through the 1980s wasn’t built for this many winters. When it lets go, the first sign is usually a ceiling stain, not a draft.
- Caps and spark arrestors clogged after the burn scar. Fire-killed pine needles and ash from standing dead trees around the burn scar pack into caps and screens. That’s debris neighboring valleys simply don’t deal with, and it masks creosote glazing underneath.
- Glazed creosote in heavily used wood stoves. When a wood stove is the primary heat through sub-freezing valley-floor nights, creosote builds faster than expected. Third-degree glazing won’t come off with a brush, and a brush-only visit misses it.
Pricing for Chimney Repair in Washoe Valley, NV
We set a flat price per job by written estimate after the inspection, and the estimate is free. Chimney flashing repair in Washoe Valley typically runs $275 – $650, chimney crown repair $350 – $900, and mortar repointing or tuckpointing on a masonry chimney $400 – $1,200 depending on how much brick and how high the work goes. Full relining, whether HeatShield resurfacing or a DuraFlex or Olympia Chimney liner, is quoted after the flue is measured and scoped. What moves the number is access, height, how much masonry has spalled, and whether the liner needs work beyond the crown and flashing. Call (844) 543-7293 for an exact quote. Estimates are free. We answer 24/7. Fast dispatch, 7am-7pm, Sunday through Friday.
We Also Serve Cities Near Washoe Valley
Washoe Valley sits between Reno and the mountains, and we work the surrounding area too, including Incline Village, Mogul, Reno, and Verdi. If you’re just over the valley rim or off the highway up toward the lake, our chimney repair service covers the same crown, flashing, and liner work. Call (844) 543-7293 to book a free estimate.
Serving Washoe Valley, NV – Our Local Coverage Area
We serve Washoe Valley and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Chimney Repair in Washoe Valley
Because wood-stove use here is heavy and the creosote builds faster than a once-a-year brush catches. When a wood stove is the primary heat through sub-freezing valley-floor nights, the flue loads up quickly, and a repair assessment regularly turns up glazed liner conditions a brush-only visit would miss. Call (844) 543-7293 for a free estimate.
Yes. Homes in 89704 surrounded by standing dead or fire-killed trees see caps and spark arrestors packed with ash and pine needles, a pattern not seen in neighboring valleys. Those clogged caps can hide glazed creosote underneath, so the assessment has to include the cap and the flue. Call (844) 543-7293 to book an inspection.
Usually two, handled in one visit. The crown and flashing fail for different reasons: crown cracks come from freeze-thaw at elevation, flashing pulls loose against an aging roof. We reseal or rebuild the crown, re-flash the penetration, and check the cap and spark arrestor for fire-killed pine needles before signing off. Call (844) 543-7293 for a free estimate.
The camera decides. We inspect the flue and show you what we see; if the clay tile can be saved, HeatShield resurfacing fits, and if it’s spalled or the smoke chamber is coated, a stainless DuraFlex or Olympia liner is the right call. Nothing gets recommended without evidence you can see. Call (844) 543-7293 for a free estimate.
Burn dry, seasoned wood, keep the fire hot enough to avoid smoldering, and don’t choke the air down overnight. Smoldering fires in a cold valley build creosote fastest. Get the flue swept more often when you’re burning hard. Call (844) 543-7293 for a free estimate.
Written by the team at Reno Chimney Cleaning.