Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Sweep Across Reno
If you burn wood in Reno, your chimney works harder than most. Thousands of homes here heat with a fireplace or a freestanding stove, and the high-desert cold plus long burning seasons load flues with creosote fast. We handle the whole job: a thorough sweep, a proper inspection, and repair when something’s wrong. One company, start to finish.
We know this valley. From the mid-century ranches near downtown to the tract subdivisions out toward Lemmon Valley, Reno homes carry specific chimney habits, and we plan every visit around them. Call (844) 543-7293 for a free estimate. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
Why Reno Homeowners Call Reno Chimney Cleaning for Chimney Sweep
Chimneys are the only thing we do. That single-trade focus means the technician at your door is trained on chimney diagnostics: draft, liner condition, creosote stage, cap and damper function. Not a sidelight for a handyman who mostly does something else. When we inspect before we recommend, it shows.
Our technicians have up to 10 years of experience, and they work with professional-grade product lines rather than whatever’s cheapest that week. That matters in a city where older housing stock hides real problems: cracked clay-tile flues, undersized stacks from old wood-heat retrofits, caps that let the wind in. We’d rather tell you the truth than sell you a project.
We serve homeowners throughout Reno, and neighbors in the surrounding valley know us for straight answers and clean work. If a chimney can safely wait another season, we say so.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Chimney Services in Reno
Chimney services in Reno start with knowing what your flue actually looks like inside. We sweep, inspect, and repair, so a problem found during cleaning gets handled without you calling a second contractor. Most Reno homeowners book a sweep once a year, before the burning season ramps up. A typical annual sweep and Level 1 inspection in Reno runs about $180 to $350, and a Level 2 inspection, which includes a camera look at the flue interior, typically runs $250 to $500. The written estimate sets the final price.
Sweeping and Creosote Removal
A sweep removes the creosote and soot that build up on flue walls, using the right tools for the liner type. Heavy, glazed creosote takes more work than light powder, and we tell you which you’ve got. Soot removal and fireplace cleaning round out the visit so the firebox is ready to use.

Inspection Before Any Recommendation
Every job starts with a look, not a sales pitch. A Level 1 inspection covers the readily accessible parts of the system; a Level 2 adds a camera pass and is the right call when there’s been a change to the appliance, a chimney fire, or a home sale. You see what we see.

Chimney Sweep Certified in Reno
Chimney sweep certified work in Reno means the technician follows a recognized inspection standard and documents what’s found. You get a clear picture of liner integrity, flue separation, and draft, not a vague thumbs-up. For attached homes and older properties near the university, that documentation is worth having on hand. Sweeping and the basic inspection usually fall in the $180 to $350 range; repairs are quoted separately from what the inspection turns up.
What Certification-Level Work Covers
It covers the whole system: firebox, smoke chamber, damper, flue, cap, and crown. Each part gets checked against how it’s supposed to perform, and anything unsafe gets flagged in plain language. Nothing gets recommended without camera evidence you can look at yourself.
Why the Paper Trail Helps
If you ever sell the home or file an insurance claim, an inspection report that names the condition of the flue is useful. It’s also how you confirm a prior repair was done correctly before you trust it with a fire.
Trusted Brands We Service in Reno
We work with a curated roster of professional-grade chimney brands, matched to the job at hand rather than a one-size-fits-all fix. For relining, that means DuraFlex and Olympia Chimney systems. For restoring a liner that’s still sound enough to resurface, HeatShield is the industry’s leading liner resurfacing system and the right tool in plenty of older Reno flues. For caps and draft solutions, Gelco and Famco products cover both weatherproofing and function. We don’t claim to stock parts locally; we specify the correct product and get it moving, which keeps turnaround fast. The point is simple: the right material for your flue, not whatever’s on hand.
See the difference
Before
After
Before
After
Before
AfterCommon Chimney Sweep Problems We See in Reno Homes
- Shared flues in attached properties. When two appliances vent into one masonry stack, a missing or damaged cap lets a neighbor’s smoke and creosote odors back down into your living space. A proper inspection checks separation between flues, not just your side.
- Cracked clay-tile flues. Much of Reno’s older core has original clay-tile liners that crack and spall with age. Gaps let creosote seep into adjacent flues or wall cavities, which is a cross-contamination and fire concern.
- Undersized flues from old retrofits. Decades of informal wood-heat conversions left some stoves vented into stacks too small for their exhaust volume. Fires run smoky and creosote builds fast; many homeowners blame the wood when the flue is the real issue.
- Wind-driven downdrafts. The Washoe Zephyr pushes smoke back down the stack when a cap is missing or the draft is weak. That’s a chimney problem, and a cap or draft fix usually solves it.
Pricing for Chimney Sweep in Reno, NV
Honest numbers for the Reno market: a typical annual sweep with a Level 1 inspection runs about $180 to $350. A Level 2 inspection with a camera pass typically runs $250 to $500. Creosote removal on a heavily glazed flue costs more because it takes more time and tools. Repairs, caps, and relining are quoted from what the inspection finds, never guessed at over the phone. Dense housing and shared stacks can add inspection time, since we check flue separation as well as your own liner. Every estimate is free and written, and the written estimate sets the final price. If the work can safely wait, we’ll tell you that too.
We Also Serve Cities Near Reno
We look after chimneys across the valley beyond the city line. Homeowners in Golden Valley, Sun Valley, Mogul, and Lemmon Valley book the same sweep, inspection, and repair service, and we plan routes around the valley’s weather and access. If you’re just outside Reno, call and we’ll confirm coverage and timing for your address before we book anything.
Serving Reno, NV – Our Local Coverage Area
We serve Reno and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Chimney Sweep in Reno
You usually can’t tell by smell alone, so the reliable answer is a Level 2 inspection. It uses a camera to check liner integrity and, critically, the separation between flues in a shared masonry stack. If the cap is missing or damaged, downdrafts can pull a neighbor’s smoke and creosote odors down into your space, and the inspection shows where the breach is. Call (844) 543-7293 for a free estimate and we’ll get it booked.
Not without checking it first. Original clay-tile flues crack and spall with age, and an unlined or damaged flue lets creosote seep through gaps into adjacent flues or wall cavities, which raises both cross-contamination and fire risk. An inspection tells you whether the tile is sound or whether relining with a system like HeatShield or DuraFlex is the right call. Call (844) 543-7293 for a free estimate before your next burn.
It’s a downdraft, and it’s common here. The strong afternoon winds push air down the stack when a cap is missing or the draft is weak, forcing smoke back through the damper and smoke chamber. A chimney cap or a draft fix usually solves it, but we check the flue first to rule out an undersized stack. Call (844) 543-7293 for a free estimate.
Once a year at minimum, and more often if you burn hard through the cold months. Reno’s long heating season and heavy wood use build creosote faster than a mild climate would, so annual sweeping keeps buildup from reaching a dangerous stage. Call (844) 543-7293 for a free estimate and we’ll set up your sweep.
Third-degree creosote is the glazed, hardened form that clings to flue walls and is the hardest to remove; it’s the stage most associated with chimney fire risk. Reno’s heavy wood burning and older, sometimes undersized flues make it more likely, and a standard brush won’t clear it. A sweep tells you which stage you’ve got and what removing it takes. Call (844) 543-7293 for a free estimate.
Whether you’re due for an annual sweep, hearing smoke where it shouldn’t be, or buying a home with an old flue you can’t vouch for, one call gets it sorted. We handle sweep, inspection, and repair under one roof with professional-grade materials, and nothing gets recommended without evidence you can see. Call (844) 543-7293 for a free estimate. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Reno Chimney Cleaning.