Chimney Liner & Rebuild Cost in Reno - Camera Evidence Before Any Quote

Liner and masonry work is where this trade gets a bad name, so nothing is quoted until you have seen the camera footage yourself. Then a written, itemized price with no scope creep.

✓ Licensed & Insured ✓ Written quotes ✓ Free estimates
Call (844) 543-7293

Call to schedule your free estimate

Work is performed by our local vetted partner.

🛡 Licensed & Insured 📝 Written Fixed-Price Quotes 💲 Upfront Pricing · Free Estimates
Sweep & inspectionSweep & inspection
Caps & crownsCaps & crowns
Flue reliningFlue relining
Masonry repairMasonry repair
Gas fireplace serviceGas fireplace service
Every visit starts with

Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed

Worth knowing

Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.

Get your free estimate
Explore

Styles & brands we work with

  • Sweep & inspection
  • Caps & crowns
  • Flue relining
  • Masonry repair
  • Gas fireplace service
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

How Much Does Chimney Liner & Rebuild Cost in Reno?

A chimney liner replacement in Reno typically runs $2,400 to $6,800, and a chimney rebuild (crown, top courses, or full stack above the roofline) usually lands between $3,500 and $14,000 depending on height and damage. Liner resurfacing with HeatShield, which saves the existing flue instead of replacing it, is the lower-cost path at roughly $1,200 to $2,600. The written estimate sets the final price, and we inspect before we recommend so you’re paying for what your flue actually needs.

Chimney Liner & Rebuild Cost Breakdown (2026)

These are typical ranges for the Reno market in 2026. A wood-burning fireplace, a gas insert, and a solid-fuel stove each carry different liner requirements, so your numbers will move within these bands based on flue size, height, and access.

Work Typical Estimated Range
HeatShield liner resurfacing (existing flue sound) $1,200 – $2,600
DuraFlex stainless liner, single appliance, standard height $2,400 – $4,500
Olympia Chimney liner system, larger or irregular flue $3,200 – $6,800
Insulated liner with new top plate and cap (Famco or Gelco) $3,800 – $6,200
Crown rebuild or repair $600 – $1,800
Top three or four courses of masonry rebuilt $2,200 – $4,800
Full chimney rebuild above the roofline $8,000 – $14,000
New damper (Gelco or Famco) $450 – $950
Cap and weatherproofing $350 – $800
Chimney sweep and inspection before the work $250 – $550

What pushes a job toward the top of a range: a tall stack, a flue that’s been relined before and needs the old liner pulled, offsets and bends that complicate a pull, and a rebuild that has to be done from a roof with limited staging. What pulls it down: a flue that’s structurally sound and only needs resurfacing, a crown that can be repaired rather than poured new, and a straightforward straight run from firebox to cap. We work with DuraFlex, HeatShield, Gelco, Olympia Chimney, Famco, and Copperfield, so the recommendation is matched to the flue rather than forced onto it.

What Affects Chimney Liner & Rebuild Pricing in Reno

  • Liner material and system. A flexible stainless system sized to your appliance sits at a very different price than a rigid or insulated assembly built for an oversized or offset flue. Matching the system to the appliance is where most of the cost difference lives.
  • Whether you resurface or reline. HeatShield resurfaces a flue that still has sound masonry behind it; a full liner replaces the flue path entirely. The inspection decides which one you actually need.
  • Chimney height and roofline access. Reno homes sit on grades that change fast, and a stack on a steep pitch or a two-story wall takes more setup than a single-story exterior chimney. Height and access move the labor line more than anything else.
  • Masonry condition above the roof. Our freeze-thaw swings and dry summer heat work on mortar joints and crowns year after year. A rebuild that starts as “just the cap” often turns into the top few courses once the crown is opened up.
  • Appliance type. A gas insert, a wood-burning fireplace, and a solid-fuel stove each need a liner rated and sized for that fuel. Getting this wrong is a safety issue, not a cost issue, so it’s not a place to trim.
  • Bundled work. Sweep, inspection, and repair handled by one company means one mobilization, one report, and one estimate instead of three trades coordinating on the same stack.

How to Save on Chimney Liner & Rebuild

The single biggest saving on liner and rebuild work is catching it before the rebuild. A crown that’s chipped and cracking can often be repaired for a fraction of a new crown, and a flue with sound masonry behind it can be resurfaced rather than relined. That’s why we inspect before we recommend: an honest diagnostic here nearly always costs less than the repair it prevents.

Second, don’t split the job across contractors. A handyman who does chimneys on the side will charge for the learning curve, and a chimney-only specialist diagnoses from crown to liner in one visit. Third, group the small items. A new cap, a damper, and weatherproofing done during the same visit as a sweep or inspection costs less than three separate trips. Fourth, ask for a written, itemized estimate so you can see what’s structural and what’s optional, then decide what can wait a season.

Free estimates are part of the deal. Call (844) 543-7293. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.

Safety First: Why This Isn’t a Do-It-Yourself Job

A chimney liner contains the heat and combustion gases from your fire. A liner that’s the wrong size, improperly connected, or cracked lets those gases into the structure of the house, and the stakes are real: carbon monoxide, creosote ignition, and heat transfer into framing. Liner installation and rebuild work also happen at height on a roof, often on a steep pitch. We don’t publish step-by-step instructions for this work because the failure modes are dangerous. What we will do is explain what a technician checks, why a given system fits your flue, and what the options cost, so you can make a decision with the facts in front of you.

Can You Fix a Chimney Liner the Same Day?

Sometimes, but not usually for a full reline or rebuild. A cracked crown, a failed cap, a damaged damper, or a resurfacing job can often be handled in a single visit if the parts are on hand. A full liner replacement needs a sweep and inspection first, then a sizing decision, then the install. For that reason, we book the inspection first and quote from what we find. We offer same-day service where the schedule allows. Call (844) 543-7293. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.

FAQs – Chimney Liner & Rebuild Cost

How much does a chimney liner cost in Reno?

A chimney liner in Reno typically costs $2,400 to $6,800 installed, with HeatShield resurfacing the lower-cost option at $1,200 to $2,600 when the existing flue is sound. Larger flues, offsets, and insulated systems push toward the top of the range. Call (844) 543-7293 for a free estimate tailored to your flue.

How much does a chimney rebuild cost in Reno?

A full chimney rebuild above the roofline in Reno usually runs $8,000 to $14,000, while rebuilding just the top few courses is typically $2,200 to $4,800 and a crown repair is $600 to $1,800. Height and access are the biggest swing factors. Call (844) 543-7293 for a free estimate and a written scope before any work starts.

Is it cheaper to repair or replace a chimney liner?

Repair is cheaper when the flue behind the liner is sound: HeatShield resurfacing at $1,200 to $2,600 beats a full replacement at $2,400 to $6,800. Replacement is the right answer when the existing liner is cracked, oversized, or unsuitable for the appliance. Our inspection determines which applies before we quote. Call (844) 543-7293 for a free estimate.

Can a chimney liner be replaced without rebuilding the chimney?

Yes, in most cases. A liner replacement runs down the existing flue path and doesn’t require taking the masonry apart, which is why it costs $2,400 to $6,800 rather than rebuild pricing. A rebuild only becomes necessary when the masonry itself has failed. Call (844) 543-7293 and we’ll inspect first and tell you which one you need.

Why does a chimney liner cost more than a sweep?

Because the scope is different. A sweep and inspection is typically $250 to $550 and is diagnostic and cleaning work. A liner is a material and installation job: the system, the insulation, the top plate, the cap, and the labor to fit it correctly to your appliance. Call (844) 543-7293 to get both quoted together and see exactly where the money goes.

Why a Chimney Specialist Does This Work

Chimney liner and rebuild work looks like masonry and feels like appliance work, and general contractors tend to treat it as a side job. Our technicians have up to 10 years of experience and work on chimney systems only, from the crown down to the firebox. That focus is why we use HeatShield, DuraFlex, Olympia Chimney, Gelco, Famco, and Copperfield: those are the materials certified chimney specialists reach for, and they let us match a solution to the flue rather than force a single system onto every house in Reno. If you’re curious how the broader service works, see our overview at Reno Chimney Cleaning, and for the surrounding area check Reno.

Book a Free Estimate

Whether you’re facing a cracked crown, a flue that’s past its service life, or a gas insert that needs a proper liner, the first step is an inspection and a written estimate. Call (844) 543-7293 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. One company handles sweep, inspection, and repair, so nothing gets handed off and nothing gets guessed at.

Pricing reflects the Reno market as of 2026. Reno Chimney Cleaning offers free estimates – call (844) 543-7293.

What Our Customers Say

★★★★★ 4.8 from 8+ reviews

"Level two inspection before we bought the house. The report was detailed enough to use as a negotiating point and he explained every photo in it."

- Rafael Guzman

"Fireplace had never drawn properly since we moved in. He found the damper was only opening halfway due to a bent linkage and fixed it in ten minutes."

- Eric Bennett

"Thorough sweep and a clear report. He was running late from the job before and arrived near the end of the window, though he did call to warn me."

- Dale Fletcher
Need Chimney Cleaning help in Reno? Licensed & insured · free written estimates
Call (844) 543-7293

Request a Free Estimate

Tell us what's going on in Reno. We'll get back to you fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Us
Call Now - We Answer 24/7
Local Service Coverage
Call Now - We Answer 24/7