Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Chimney Company in Lemmon Valley, NV
Chimney inspection in Lemmon Valley is a different job from inspection down in Reno. Up here, past 5,000 feet in the high desert, a wood stove or fireplace insert is often the main heat for the house, not a decoration for cool evenings. That means a full heating season from October through April of steady burning, and the creosote that comes with it. Our technicians have up to 10 years of experience reading exactly this kind of flue. Call (844) 543-7293, we answer 24/7, and we’ll book a fast dispatch from 7am to 7pm.
Why Lemmon Valley Homes Are Different
The valley’s housing stock shapes the chimney work here more than anything else. Most of it was built between the 1970s and the 1990s – a heavy share of it older manufactured homes, along with ranch-style single-family houses and rural properties on larger lots. Wood-burning stoves and inserts were added to many of those houses later as primary or supplemental heat, often without upgrading the original flue to match the new appliance. A flue sized for an older stove and then fed by a newer, hotter-burning one will load up with creosote faster than the venting was ever designed to handle.
Then there’s the fuel. Many homeowners here burn locally cut pine and fir, which leaves behind sticky, glassy creosote faster than hardwood does. Combined with winter nights that routinely drop into the teens and single digits, it’s common for technicians to find stage-3 glazed creosote by midwinter in Lemmon Valley. That’s a coating that no brush alone will take off. It’s also why a mid-season cleaning happens here, not just an annual one.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Our Main Lemmon Valley Services
Two services account for most of the calls we get from Lemmon Valley homeowners.
Chimney Sweep in Lemmon Valley
A sweep here is less about tidying ash and more about stripping out the creosote that builds fast in a stove that runs every cold night from fall into spring. We brush the full flue, clear the firebox, and check the cap and damper while we’re up there, because a stove doing primary heat duty in Lemmon Valley can’t afford a draft problem nobody noticed. Understanding whether your flue is safe to burn often starts before the sweep, with a proper chimney sweep that includes a look at what your appliance is actually doing. Ask us about the condition of your flue before burning season starts.

Chimney Repair in Lemmon Valley
Repair work in this valley tends to start with the flue, not the firebox. Original venting from older stove installations is where we find cracked liners, failed joints, and water damage from freeze-thaw cycles. We inspect before we recommend anything, then match the fix to the problem – a resurfaced liner for one flue, a full reline for another. Capping and draft issues get handled with proper venting products, not improvised parts. When it’s time for chimney repair, the scope should come from what the camera shows, not a guess.

Chimney Inspection in Lemmon Valley
Chimney Inspection in Lemmon Valley starts with a simple reality: homes built between the 1970s and 1990s often still have original flues sized for older wood stoves, and a long heating season from October through April of dense pine and fir burning drives creosote fast. A proper Chimney Inspection tells you whether that flue is safe before you light another fire. We inspect before we recommend, so nothing gets sold to you that your chimney doesn’t actually need.
Chimney Flue Inspection
Signs you need it
You’re seeing glazed, tar-like creosote on the flue walls, smoke rolling back into the room, or a stove that won’t draw the way it used to.
What it costs in Lemmon Valley
A flue inspection with a camera and photo report typically runs $150 – $350, and the written estimate sets the final price.
How we do it
We run a camera down the flue, photograph the interior at each section, check the joints, cap, and damper, then walk you through what the images show before any repair is discussed.
Level 2 Chimney Inspection
Signs you need it
You’ve changed appliances, moved into a Lemmon Valley home with an unfamiliar stove, or the flue was never documented for the appliance now connected to it.
What it costs in Lemmon Valley
A Level 2 inspection typically runs $200 – $450 depending on flue access and how many appliance connections need checking, with the written estimate setting the final price.
How we do it
We inspect every accessible section of the venting system, including connections, offsets, and the exterior, and document the whole thing with photos so you have a record of the flue’s condition.
What Chimney Inspection Costs in Lemmon Valley
| Item | Typical range in Lemmon Valley |
|---|---|
| Chimney flue inspection (camera and photo report) | $150 – $350 |
| Level 2 chimney inspection | $200 – $450 |
| Inspection bundled with a sweep | $180 – $400 |
Will an inspection tell me if my flue is safe to burn this winter?
Yes. The camera shows creosote depth, cracks, and failed joints, so you’ll know whether the flue is safe or needs work first. Call (844) 543-7293 for an exact quote; estimates are free.
How often should a Lemmon Valley chimney be inspected?
Once a year, and many homeowners here add a mid-season look because pine and fir load the flue so fast. If you burn steadily from October through April, don’t wait for spring. Call (844) 543-7293 to book.
Brands We Service in Lemmon Valley
We work with Olympia Chimney, DuraFlex, and Famco on liner systems, caps, and venting components, which means repair recommendations get matched to the right professional-grade material for the flue instead of a one-size fix. Brand availability affects turnaround, so we confirm what a job needs when we book it. See our brands for the full lineup.
See the difference
Before
After
Before
After
Before
AfterPricing for Chimney Company in Lemmon Valley, NV
| Service | Typical range in Lemmon Valley |
|---|---|
| Chimney flue inspection | $150 – $350 |
| Level 2 chimney inspection | $200 – $450 |
| Inspection with sweep | $180 – $400 |
| Standard chimney sweep | $150 – $300 |
| Mid-season creosote removal | $180 – $350 |
| Cap and damper repair | $150 – $400 |
| Minor flue and joint repair | $250 – $600 |
| Liner resurfacing (HeatShield) | $1,200 – $2,800 |
| Full reline (DuraFlex or Olympia Chimney) | $2,500 – $5,500 |
In Lemmon Valley, price climbs fastest when the flue turns out to be original venting sized for an older stove and the appliance has since been upgraded. Access also matters on rural and manufactured-home properties where the roofline or chase makes the flue harder to reach. Every job is quoted upfront from the written estimate, so the number you agree to is the number you pay.
Neighborhoods We Serve in Lemmon Valley
We inspect and sweep chimneys across the valley, from the older manufactured-home communities to the ranch properties on the outer roads. When you call, we’ll give you a realistic window for your address rather than a range for the whole valley. Homes closer to the main roads generally get booked sooner than properties further out toward the rural edges, so mention your location when you call and we’ll confirm timing.
- Older manufactured-home communities near the valley floor
- Ranch-style single-family neighborhoods off the main valley roads
- Rural properties on larger lots toward the outer edges
- Homes near the Lemmon Valley airport area
Service Area – Cities Near Lemmon Valley
Lemmon Valley sits just north of Reno, and we work the surrounding communities as well. If you’re in Cold Springs, NV heading north on the highway, or over in Golden Valley, NV, we handle chimney inspection, sweeping, and repair there too. East of the valley, Sun Valley, NV sees the same wood-stove use and the same creosote problems. And of course, Reno, NV and the neighborhoods around it are our home ground. No matter which of these you’re in, the process is the same: we inspect first, show you what the camera found, and quote the work before we start.
Serving Lemmon Valley, NV – Our Local Coverage Area
We serve Lemmon Valley and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Chimney Company in Lemmon Valley
For a routine sweep or inspection, no. Structural repair or relining can require a permit from the county, and some HOAs want notice before exterior work. We’ll flag that when we quote, so you know what to check before scheduling.
We book within our dispatch window of 7am to 7pm, Sunday through Friday, and confirm your slot when you call. Call (844) 543-7293. We answer 24/7. Fast dispatch from 7am to 7pm. A call outside dispatch hours is booked into the next opening.
Yes. Lemmon Valley and the surrounding north-valley communities are covered for inspection, sweeping, and repair. If you’re unsure whether your specific address falls inside the area, call (844) 543-7293 and we’ll tell you straight.
If your stove has been burning since October and you haven’t had a good look at the flue yet, don’t go another winter on guesswork. Call (844) 543-7293 for a free estimate. We answer 24/7, and fast dispatch is available from 7am to 7pm, Sunday through Friday. One company handles sweep, inspection, and repair, so your chimney gets sorted out in one place by technicians trained on chimney systems alone.
What happens when you call
- 1A real person answersNo phone trees. Talk to a local chimney cleaning pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you. The visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Lemmon Valley Customers Say
"Level two inspection before we bought the house. The report was detailed enough to use as a negotiating point and he explained every photo in it."
- Rafael Guzman"Fireplace had never drawn properly since we moved in. He found the damper was only opening halfway due to a bent linkage and fixed it in ten minutes."
- Eric Bennett"Thorough sweep and a clear report. He was running late from the job before and arrived near the end of the window, though he did call to warn me."
- Dale Fletcher